|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Online Service |
| Warranty: | Lifetime Warranty |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Name | Tinplate sheet/coil |
Thickness | 0.12mm-0.60mm,or customized |
Width | 260mm-1020mm,or customized |
Length | Support Customization |
Tin Coating | General: 2.8g or 5.6g, can be produced according to your needs |
Substrate Type | MR / SPCC / L / D |
Reference Standard | GB/T 2520, JIS G3303, JIS G3315, DIN EN 10202, DIN EN 10203 |
Substrate Type | Introduction |
MR | The most general steel, steelmaking impurity residue less, excellent mechanical properties and corrosion resistance |
L | Used for the production of acidic contents (oranges, yellow peaches, pineapples, etc.), and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel, such tinplate is often calledKPlate |
D | Used to produce two pieces of high-processing tin plate substrate steel, such tin plate is often called.DIMaterial |
SPCC | Chinese characteristics, using ordinary hot rollingSPHCProduces, usually used for miscellaneous tank purposes. |
Classification | Representation of Tin Coating Weight | Tin Plating Nominal Weight (g/m2) | Minimum Average Tin Plating Weight (g/m2) |
Equal Tin Plating (E) | 1.1/1.1 | 1.1/1.1 | 1.8 |
2.2/2.2 | 2.2/2.2 | 4.0 | |
2.8/2.8 | 2.8/2.8 | 5.0 | |
5.6/5.6 | 5.6/5.6 | 10.5 | |
Differentiated Tin Plating (D/A) | 2.2/1.1 | 2.2/1.1 | 2.0/0.9 |
2.8/1.1 | 2.8/1.1 | 2.25/0.9 | |
5.6/1.1 | 5.6/1.1 | 5.05/0.9 | |
2.8/2.2 | 2.8/2.2 | 2.25/2.0 | |
5.6/2.2 | 5.6/2.2 | 5.05/2.0 | |
5.6/2.8 | 5.6/2.8 | 5.05/2.25 |
No. | C | Si | Mn | S | P | Cu | Ni | Cr | Mo |
D | 0.12 | 0.03 | 0.6 | 0.05 | 0.02 | 0.2 | 0.15 | 0.1 | 0.05 |
L | 0.13 | 0.03 | 0.6 | 0.05 | 0.15 | 0.03 | 0.04 | 0.06 | 0.05 |
MR | 0.13 | 0.03 | 0.6 | 0.05 | 0.2 | 0.2 | 0.2 | 0.1 | 0.05 |
Standard Name | Nominal Hardness HR30TS | Strong Yield MPA | Scope of Application |
T-1 | 49 | 230 /-50 | Drawing requirements, drawn ironing cans, nozzles, nozzles, closures |
T-2 | 53 | 245 /-50 | Ring and plug, dome, closure, shallow pull and special tank parts |
T-2.5 | 55 | 260 /-50 | Battery cell, small can cover and body |
T-3 | 57 | 275 /-50 | Cans and cans, large diameter caps, crown caps |
T-3.5 | 59 | 290 /-50 | Can body, closure and crown lid |
T-4 | 61 | 340 /-50 | Can body, closure and crown lid |
T-5 | 65 | 480 /-50 | Cans and cans |
){kind=link}